Gold Member Since 2009
Audited Supplier
Shanghai Haicheng Special Steel Container Co., Ltd.

Modified Container, Container House, Sledding House manufacturer / supplier in China, offering 20ft Modified Container Accommodation with Sled, Flat Pack Office Container for Modular Meetingroom (shs-fp-office066), Office Container/ Two Story Office/Prefab Office/Mobile House (shs-mh-office050) and so on.

(/ )

Supplier Homepage Product ISO Container House 20ft Modified Container Accommodation with Sled

20ft Modified Container Accommodation with Sled

FOB Price: US $4,700-5,000 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $4,700-5,000/ Piece
Get Latest Price
Production Capacity: 200 Units Per Month
Transport Package: Container
Payment Terms: L/C, T/T, D/P, Paypal, OA

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: SHS-mc-housing002
  • Usage: Warehouse, Villa, Dormitories, Temporary Offices, Workshop
  • Customized: Customized
  • Insulation: PU Foam
  • Floor Board: 18mm Fiber Cement/Magnesium/Chipboard
  • Specification: 20ft, 30ft, 40ft
  • HS Code: 94060000
  • Material: Container
  • Certification: ISO, SGS
  • Container: New
  • Size: 40 Feet
  • Trademark: Haicheng
  • Origin: Shanghai
Product Description

Container Modifications:
It is a modified container accommodation with Sled. Shipping containers have monocoque bodies. The corrugation panels (roof, sides, and back), floor, purlins, front doors, frame, and rails form an integrated structural skin. They are strong and made to carry floor loads far in excess of what is required for typical home construction. But, when we modify them, cutting holes or penetrating members, they are weakened. high level of modification the shipping container home design calls for, our structural engineer and architect will supply a professional plan.

20ft Modified Container Accommodation with Sled
As we said above, when cutting a shipping container or removing any of the paneling, it's structural integrity is compromised. As an extreme example, consider the removal of all a container's corrugated paneling along the length of one side (see the images below). Without reinforcement, the container deforms and then fails structurally. As a general rule, whenever remove portions of the panelized corrugation, steel framing will be required to frame out the opening. In addition, column and roof support will be necessary depending on the size of the opening(s) and roof/wind loads.
20ft Modified Container Accommodation with Sled
Steel cutting, framing, and welding is a large part of shipping container home design and construction. Typically, steel construction is not used much in single family or smaller home design because of expense. Cost of steel vs. wood/light gauge framing is substantial and the labor cost for steel vs. Carpentry is also higher. To combat this, much of the welding and reinforcing done off-site before setting the containers on site and starting the interior fit-out.
20ft Modified Container Accommodation with Sled


Table I. Safety Factors on Land for Various Stack Heights on Land with Container Corner Post Capacity of 190,480 lbs (86,400 kg)
Number of Containers Stacked on OneTotal Height of StackSafety Factor on Corner post loading
The table shows that we can stack 9-on-1 on land, and maintain a safety factor of greater than 1.5.
Table II. Stack Heights on Land forVarious Detector Densities with Container Corner Post Capacity of 214,290 lbs (97,400 kg)
Number of Containers Stacked on OneTotal Height of Stack (m)Safety Factor on Corner Post Loading
with payload density = 0.60 g/cc (22,150 kg gross)with payload density = 0.66 g/cc (24,000 kg gross)with payload density = 0.75 g/cc (27,150 kg gross)with payload density = 0.85 g/cc (30,480 kg gross)
8 on
9 on 125.91.951.801.591.42
10 on 128.51.761.621.431.28
11 on 131.11.601.481.301.16
Conclusion:Stacking ISO containers 10 high on land is reasonable, and stacks as high as 12 may be possible depending on the type of container purchased and on the loading of the container with Off-Axis detector elements. For a final detector design, good engineering practice would require that the corner posts of the selected containers be loaded to failure to more accurately determine the safety factor of the stacked array.
Send your message to this supplier
Mr. Jason Yang
To: Mr. Jason Yang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now